The details of 370W Clear Water well Pump as follow

Voltage:220V

Rated Power: 370W/0.5HP

Q.max:26L/min

H max:21m

Suct.L.max:9m

Rotating speed:2850r/min

How to use this Garden Pump?

Operation Steps:

1. Unscrew filter housing and remove filter.

2. Fill completely with water.

3. Reinstall filter and screw filter housing and seal back on.

4. If you want to shorten the intake time, fill the suction line as well (onlu possible with the check valve).

5. Open pressure line (trun on water spigot or nozzle), so that air can escape during intake.

6. Switch the device on.

7. When water runs out evenly, turn the device off.

Tips:

The max suction height is 21m and it takes some time before automatic pumping.

Adding some pilotage water to the head of the pump will help accelerate the flow rate of inlet. The closer water inlet pipe and the pump is the better the effect.

Impurities are not allowed in the water and there is a jam if the diameter is more than 1mm.

There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term. Water Inlet and outlet need to be sealed up when you connect pipes.

AFQ

1.Question:Can you drain a water heater with this

Answer:Yes you can however you must ensure you have the correct fittings in order to attach a standard water hose to the unit. I had to purchase an adapter hose fitting to hook up a garden hose to my pump. I'm using this pump to transfer water from rain barrels to another holding tank.

2.Question:What Amperage is needed

Answer:I used a 20 amp circuit and run two pump off it without any issues

3.Question:what is voltage rating for this pumps, in my country we use 220-240V, 50Hz, can this type of pump work for me?

Answer:It's OK for this model.

http://www.dingqimax.com/