Acicular bainite ductile iron roll adding nickel, manganese, chromium, molybdenum and other alloying elements, it is a needle-like organization(martensite and bainite) matrix, higher than the pearlite ductile iron roll strength, toughness and more well, w
The length and width of each piece of finished product is 40 × 60cm Simulation plant lawn. Each Simulation Eucalyptus Lawn Wall has a splicing Jack and handle, which can be spliced into lawn of any size. It is an ideal product for decorating any place you
Specifications:UCMSL500 UCMSL600 UCMSL700 UCMSL800 UCMSL900 UCMSL1000Working angle at increment of 5,from 0 to 60.Easy to adjust bottom due to spring can be removed from back.Mounting width are from 500 to 1000mm.
1. Excellent thermal stability, resist devitrification at high temperature.2. Low heat strong capacity, Low thermal conductivity3. Contain no binders or corrosive agents4. Resilient up to high temperatures
Size: NPS1/2”to NPS8” (DN15 to DN200) Pressure Rating: ASME Class150 to Class2500 (PN16 to PN420) Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Stainless Seat: Soft, Metal to Metal
Main gearbox upper housing casting introduction: The figure as shown is FD2250G upper box, a upper box of wind turbine gearbox supplied to NGC. Combined with the lower box body of FD2250G, it is the box shell of the wind power gear box.With the casting gr
Tungsten carbide wear partshas excellent performance and is widely used in industry.Good wear resistance and high hardness, make it suitable for high temperature, abrasion, corrosion wear parts, mechanical parts and drawing die etc.