The multi-spindle CNC wood router is an economical and practical woodworking machine tool. Among the four spindles, two high-power spindles are dedicated to slotting and blanking, and the other two spindles are dedicated to stamping
Drum wood chipper, an ideal chipper machine to process wood logs, wood timber, bamboo, watse wood into wood chips.Equipped with feeding conveyor, discharge conveyor and electric panel, easy to operate.Capable to handle big diameter wood. Final chips size
Stainless air vent caps is For air intake and exhaust. Made of stainless steel AISI304, polishing surface finish. With insect screen,fixing clips, rubber sealing. Can be used outside wall as well as inside. Packed in a transparent bag, including 2 stainle
Food dehydrator 8 trays, thickened layer frame, whole stainless steel trays. To complete the upper and lower grid spacing of 25MM,height to meet the drying of large capacity ingredients.
The High Pressure Spray Dryer equipment combines the two functions of drying and granulation. According to the requirements of the production process, the pressure flow, the size of the nozzle hole and the flux of the liquid nozzle can be adjusted to prod
The wind turbine main shaft is one of the components of the wind turbine drive system. It mainly plays the role of supporting the hub and the blade to transmit the torque to the speed increaser.
This production line is mainly used for punching and cutting on channel steel, the punching process is fully digitally controlled, it can punch holes on channel steel from three sides,c channel punching machine
The aluminum alloy template must be used in standard high rise buildings, in order to reduce the use of costs (construction of a single building below 30 floors is not suggested, only if the phased construction)
Permanent magnetic rollers are specially used to remove the iron tramp buried in deep. They are usually installed as a head drum on the conveyor belt, and will catch the tramp iron efficiently from the bottom of material layer.
The idler is used to support the track shoe Assy and guide the winding of the track shoe Assy. The rim of the idler can jam the outer edge of the track link to prevent lateral shedding, and tighten the track through the tensioning buffer connected to miti